Waterproof breathable fabric is mainly used for outdoor jackets, rainwear, ski wear, hiking jackets, lightweight shells and other garments that need water protection while allowing moisture vapor to escape.
Engineered Waterproof Breathable Fabrics for Outdoor Jackets
PU and TPU laminated fabrics with waterproof, breathable and downproof options for jackets, rainwear and outdoor performance apparel.
0Martindale
INDUSTRY PAIN POINTS↓
KEY CHALLENGES IN WATERPROOF JACKET MANUFACTURING
Waterproof jacket manufacturers face critical challenges in balancing performance, consistency, and cost. From achieving both waterproofing and breathability to ensuring reliable laminated fabric quality and providing credible performance data, these pain points directly impact product quality, customer satisfaction, and market competitiveness.
01
WATERPROOFING VS. BREATHABILITY
Hard to Achieve Both Waterproofing and Breathability at the Same Time
Waterproof membranes that block water often trap moisture and reduce breathability, making jackets uncomfortable during intense activity. Conversely, highly breathable fabrics may compromise waterproofing. Manufacturers struggle to find the right balance between these two critical performance requirements without significantly increasing production costs.
02
LAMINATED FABRIC QUALITY
Inconsistent Laminated Fabric Quality Across Suppliers
Laminated fabric quality varies widely across suppliers, making it difficult to ensure consistent performance in finished jackets. Variations in membrane adhesion, coating thickness, and material durability can lead to premature delamination, reduced waterproofing, and customer complaints. This inconsistency increases quality control costs and damages brand reputation.
03
TESTING & VERIFICATION
Lack of Reliable Testing Data to Back Up Performance Claims
Without credible test data, buyers have no way to verify what they're getting. Many suppliers lack third-party certifications or standardized testing results, making it impossible to compare performance claims objectively. This uncertainty forces buyers to rely on supplier reputation alone, increasing procurement risk and limiting market transparency.
HOW HAIDA SOLVES THESE
Haida offers a focused range of waterproof shell fabrics — all at 360 GSM with a consistent 142 cm width — allowing buyers to match lamination type and performance level to different outerwear programs:
• 5015# PU Silver-Coated — Full-matte finish; ideal for rainwear and windbreakers.
• 6630F# PU Laminated — Verified waterproofing (>16,000 mm hydrostatic pressure) with high breathability (>7,000 g/m²/24h MVTR); suited for technical hardshell jackets.
• 8500F 2-Layer TPU — Impenetrable down-proof barrier; designed for luxury parkas and high fill-power down garments.
All styles share a warp-knitted 75D/144F construction and are available with:
• OEKO-TEX STANDARD 100 certification
• Pantone-matched custom colors
• Factory-direct, make-to-order supply from our Haining facility
Consistent, testable performance across every production run — with reduced sourcing risk.
5015#
6630F#
8500F#
Technical Parameter Table
| Item | Width range | Surface direction | Abrasion performance | Development stage | Fabric weight |
|---|---|---|---|---|---|
| 5015# |
142 cm / 56 in |
PU silver-coated full-matte lamination; smooth waterproof surface |
Test data available on request; confirm performance before bulk production |
Make-to-order; sample and color confirmation before bulk production |
360 GSM |
| 6630F# |
142 cm / 56 in |
PU laminated breathable shell; soft velour hand feel |
Hydrostatic pressure >16,000 mm; MVTR >7,000 g/m²/24h; confirm Martindale before contract use |
Sample, color matching, and performance customization available before bulk production |
360 GSM |
| 8500F |
142 cm / 56 in |
2-layer TPU white film lamination; down-proof windproof outer shell |
Test data available on request; confirm performance before contract or high-volume use |
Make-to-order; sample, color, and performance customization before bulk production |
360 GSM |
Application
5015# is a 360 GSM PU silver-coated full-matte laminated fabric engineered for outerwear programs that demand a clean, smooth waterproof surface. Its full-matte finish and reliable water-repellent performance make it well suited for hardshell jackets, ski shells, rain jackets, workwear outer layers, and technical outerwear collections. The fabric is particularly appropriate for brands and manufacturers seeking a cost-effective laminated shell with a consistent matte appearance for mid-volume production runs.
Application
6630F# is a 360 GSM PU laminated breathable shell fabric combining a soft velour hand feel with high-performance waterproofing and breathability. With a hydrostatic pressure exceeding 16,000 mm and an MVTR above 7,000 g/m²/24h, it is suitable for active outerwear, hiking jackets, ski mid-layers, softshell jackets, and performance sportswear where moisture management and comfort are equally critical. It is an ideal choice for outdoor brands, OEM sportswear factories, and technical apparel programs requiring certified breathability data.
Applications
8500F is a 360 GSM 2-layer TPU white film laminated fabric designed for down-proof and windproof outer shell applications. Its tight construction and TPU lamination make it suitable for down jackets, puffer coats, quilted outerwear, and windbreaker shells where feather leakage prevention and wind resistance are primary requirements. The fabric is well suited for down apparel manufacturers, outdoor brands, and wholesale outerwear programs seeking a dependable, lightweight shell material for bulk production.
QUALITY ASSURANCE
Technical Certificate
Every fabric we produce is backed by internationally recognized certifications — verified for safety, compliance, and consistent quality.
YOUR TRUSTED UPHOLSTERY FABRIC PARTNER
Why Choose Haida
Haida specializes in waterproof and breathable shell fabrics for outdoor jackets and hardshell outerwear, with 29 years of factory experience in Haining, Zhejiang. We offer PU and TPU lamination options, OEKO-TEX STANDARD 100 certification, and factory-direct supply with MOQ 1,000m and 25–30 day lead times. Partner with us for reliable, high-performance outerwear fabrics.
OEM/ODM Waterproof Breathable Fabrics Development Process
From sample analysis to bulk production, we provide customized upholstery fabric solutions based on fabric type, color, texture, backing and finishing requirements.
01
Requirement Confirmation
Confirm fabric application, target market, fabric type, color, handfeel, GSM, width, backing, finishing process and order quantity.
02
Sample / Artwork / Specification Review
Review the customer’s physical sample, reference image, design artwork or technical specification to evaluate fabric structure and production feasibility.
03
Fabric & Process Recommendation
Recommend suitable fabric base and finishing options, such as Holland velvet, FDY velboa, Mosha velvet, suede, brushed knit, printing, bronzing, embossing, glue embossing or lamination.
04
Color & Sample Development
Develop lab dips, fabric samples or process samples according to the confirmed requirement for customer approval.
05
Backing & Finishing Confirmation
Confirm backing fabric, lamination method, pile height, width allowance, shrinkage and final surface effect before bulk production.
06
Bulk Production & Quality Control
Arrange greige fabric production, dyeing, printing, embossing, bronzing, lamination, cutting, inspection and packing according to approved sample.
07
Shipment & Follow-up
Arrange shipment documents, delivery and follow-up for repeat orders, new colors or further product development.
FAQ
What is waterproof breathable fabric used for?
What is the difference between waterproof fabric and waterproof breathable fabric?
Is this fabric suitable for outdoor jackets?
What membrane or coating options do you offer?
Can you provide waterproof and breathability test data?
Can waterproof breathable material be customized?
Is TPU laminated fabric suitable for jackets and downwear?
What information should I provide for quotation?
Ready to Source with Confidence?
GET STARTED
Send us your specs or sample request — our team replies within 24 hours with pricing, lead time, and technical support.
other solution
Base Fabric & Material Guide
Functional Performance Fabric
UV Protection Quick-Dry Sun Protection Fabric
